Page GB-16
Operation
Operation
Before getting started
• Read chapter "For your safety" on page
GB-4 and all the safety notices.
• Install the exhaust hood as described in
chapter "Assembly" on page GB-11.
(16)
(17)
(18)
(19)
Switching the appliance on
and off
• To switch the appliance on, touch the
sensor (21)
. You will hear a tone, the
sensors will light up and the blower fan
will start running at (16)
• To switch the appliance off, touch the
sensor
again. You will hear a tone, the
sensor light will turn off and the motor will
stop running.
Changing the fan setting
The fan has three settings:
(16)
• To change the fan setting, touch the sen-
sor for the (other) desired setting. You will
hear a tone, the sensor of the selected
fan level will light up and the blower fan
will start running at the selected level.
Switching off the fan
• To switch the fan off, touch
– the sensor (21)
or
– the sensor for the current fan setting
Activating the auto-off feature
(21)
(20)
Your exhaust hood is equipped with an au-
to-off feature, which will help turn off the ap-
pliance automatically after five minutes.
vated only when the appliance is in op-
eration, i.e. when a fan level is selected.
To activate the auto-off feature,
• touch the sensor (20)
ance is running. You will hear a tone and
low.
the sensor will light up.
To deactivate the auto-off feature,
• touch the sensor
or
• touch the sensor (21)
low, (17)
medium and (18)
once more.
The auto-off feature can be acti-
when the appli-
again.
.
high.