3.4
Accessibility to the interior of the combustion head
•
Switch off the electrical power.
•
Unscrew the locknuts 6)(Fig. 16) and release the tie rods 7-8).
•
Disconnect the servomotor socket X1).
•
Disconnect the electrode wires 2) after removing the cover 12).
•
Remove the 8 fixing screws 1) and the protections 3-4).
•
Remove the fixing screws 11).
•
Detach the suction duct 5) of the burner, as shown in Fig. 16.
•
Turn the under part of the elbow 9) anticlockwise until it comes free of its slot.
•
Unscrew screw 10) with pressure test point.
•
Extract the internal part 13) of the combustion head.
•
With burner closed, the accessibility to the interior combustion head is possible by removing the cover 12).
1
7
6
5
12
20098804
2
CHAPTER
3
1
10
12
6
4
3
Installation
11
8
11
X1
Fig. 16