Table of Contents
Advertisement
Push and hold the WPS button located on the Device's front panel for more than 5 seconds.
4
Alternatively, you may log into Device's web configurator and go to the Network Setting >
Wireless > WPS screen. Enable the WPS function and click Apply. Then click the Connect button.
Note: Your Device has a WPS button located on its front panel as well as a WPS button in
its configuration utility. Both buttons have exactly the same function: you can use
one or the other.
Note: It doesn't matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The Device sends the proper configuration settings to the wireless client. This may take up to two
minutes. The wireless client is then able to communicate with the Device securely.
VMG1312-B10B / VMG1312-B30B Series User's Guide
Chapter 4 Tutorials
39
Advertisement
Table of Contents
