Table of Contents
Advertisement
Chapter 7 Wireless
Table 19 Wireless > General: Basic (802.1X) (continued)
LABEL
Password 1~4
more.../less
WEP Encryption
IP Address
Port Number
Shared Secret
108
DESCRIPTION
The password (WEP key) is used to encrypt data. Both the Device and the wireless stations
must use the same password (WEP key) for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
You must configure at least one password, only one password can be activated at any one
time.
Click more... to show more fields in this section. Click less to hide them.
Select 64-bits or 128-bits.
This dictates the length of the security key that the network is going to use.
Enter the IP address of an external RADIUS server in dotted decimal notation.
The default port of a RADIUS server for authentication is 1812. You need not change this
value unless your network administrator instructs you to do so.
Specify a password (up to 32 alphanumeric characters) as the key to be shared between the
external RADIUS server and the Device. This key is not sent over the network. This key
must be the same on the external RADIUS server and the Device.
VMG1312-B10B / VMG1312-B30B Series User's Guide
Advertisement
Table of Contents
