Table of Contents
Advertisement
Chapter 29 Remote Management
The following table describes the fields in this screen.
Table 108 Maintenance > Remote MGMT
LABEL
Trust Domain
Status
IP Address
Services
LAN/WLAN
WAN
Trust Domain
Port
Certificate
HTTPS
Certificate
Apply
Cancel
276
DESCRIPTION
This field displays whether the Trust Domain is active or not.
Enter the Trust Domain IP address.
This is the service you may use to access the Device.
Select the Enable check box for the corresponding services that you want to allow access to
the Device from the LAN/WLAN.
Select the Enable check box for the corresponding services that you want to allow access to
the Device from the WAN.
Select the Enable check box for the corresponding services that you want to allow access to
the Device from the Trust Domain.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Select a certificate the HTTPS server (the Device) uses to authenticate itself to the HTTPS
client. You must have certificates already configured in the Certificates screen.
Click Apply to save your changes back to the Device.
Click Cancel to restore your previously saved settings.
VMG1312-B10B / VMG1312-B30B Series User's Guide
Advertisement
Table of Contents
