Table of Contents
Advertisement
• Read "Installation guidelines" on page 58 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku:
https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1.
Remove the front door.
Figure 39. Front door removal
a.
Use the key attached on the rear of the server to turn the cover lock to the unlocked
position.
b.
Open the front door.
c.
Lift the front door slightly upward until you can completely remove it.
After you finish
Remove the server cover
Use this information to remove the server cover.
About this task
S014
CAUTION:
ThinkSystem ST650 V2 Setup Guide
84
Advertisement
Table of Contents
