Table of Contents
Advertisement
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku:
https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1.
For each foot stand, carefully align the pin and screw hole on the foot stand with the corresponding
hole on the chassis; then, use a screwdriver to install a screw to secure the foot stand.
Figure 97. Foot stand installation
Step 2.
For each foot stand, rotate the foot stand outwards.
Figure 98. Foot stand adjustment
Important: To help the server stand steadily, ensure that the foot stands are rotated outward.
ThinkSystem ST650 V2 Setup Guide
144
Advertisement
Table of Contents
