RACKMOUNT REMOTE POWER MANAGERS
When you have accessed command mode using the system password,
the Default command will be applied to all plugs.
When you have accessed command mode using a plug (user) password,
the Default command will only be applied to the plugs permitted by the
password.
5. Suppress command confirmation prompt: To execute a boot/on/off
command without displaying the Sure? prompt, include the ,Y option at the
end of the command line. For example:
/ON ROUTER,Y or /BOOT 2,Y
5.2.4 A
C
PPLYING
OMMANDS TO
As described below, boot/on/off commands can be applied to only one switched
AC plug or to more than one plug.
1. Several plugs: To apply a command to several plugs, enter the numbers or
names for the plugs, separated by a plus sign (+). For example, to switch plugs
1, 3, and 4 off, type the following and press Enter.
/OFF 1+3+4
2. Series of plugs: To apply a command to a series of power manager plugs, type
the number for the plugs that mark the beginning and end of the series,
separated by a colon. For example, to switch plugs 1 through 3 on, type the
following and press Enter.
/ON 1:3
3. All plugs: To apply a command to all plugs, type an asterisk in place of the
name or number. For example, to boot all plugs, type the following and press
Enter.
/BO *
44
NOTES
S
P
EVERAL
LUGS