Serial Parameters Menus - Black Box PS568A User Manual

RACKMOUNT REMOTE POWER MANAGERS
If a reboot command is applied to all four plugs, the power manager will respond
as follows.
1. Turn off all four plugs (short delay between plugs).
2. Wait 1 second, turn on plug 1, wait 1 second.
3. Wait 2 seconds, turn on plug 2, wait 2 seconds.
4. Wait 5 seconds, turn on plug 3, wait 5 seconds.
5. Wait 1 minute, turn on plug 4.
4.3.3 S P
ERIAL ARAMETERS
The Serial Parameters menus are used to configure the power manager's serial
COM port and allow you to select parameters such as the baud rate, parity, and
modem initialization string. To access the Serial Parameters menu, proceed as
follows.
• Web browser interface: Click on the Setup button to access the Setup menus,
then click on the Serial Parameters button. The Serial Parameters menu
appears (Figure 4-7). Once you select the appropriate menu options, click on
Apply to save the settings or Cancel to start over.
Figure 4-7. Serial Parameters menu—Web browser interface.
• Text Interface: Type /C and press Enter. The Serial Parameters menu will
appear as shown in Figure 4-8.
28
M
ENUS