Table of Contents
Advertisement
4.3.7 S
P
AVE
ARAMETERS
Click on this button to save parameters and return to the Plug Status screen
(Figure 4-1 or Figure 4-2).
4.3.8 S
P
WITCH
ANEL
Click on this button to return to the Plug Status screen (Figure 4-1 or Figure 4-2)
without saving.
4.3.9 L
O
B
OG
UT
UTTON
Click on this button to log out of the system.
4.4 Saving Configuration Parameters
The Rackmount Remote Power Manager offers two methods for saving parameters:
saving to memory and saving to an ASCII file.
Saving parameters to memory ensures that your user-defined configuration will
remain intact if power to the power manager is temporarily interrupted. After the
configuration menus have been used to change parameters, the power manager
will prompt you to save parameters before exiting from command mode. At this
point, the power manager offers the options to save parameters, continue without
saving, or revert to the previously saved parameters.
Saving parameters to an ASCII file allows you to create a backup of your currently
defined configuration. As described in Chapter 6, this provides quick recovery if
the power manager is accidentally reset to default parameters, and also allows you
to copy parameters to other power managers when several units need to be
configured with the same parameters.
After new parameters have been applied, the power manager will display
a Save prompt. In the Web browser interface, this prompt appears when
you leave the configurations menus. In the text interface, the Save
prompt appears when you disconnect from the power manager. At this
point, you have the option of saving new parameters to memory,
continuing without saving, or reverting to previously saved parameters.
If parameters have not been saved and power to the power manager is
interrupted, newly defined parameters will be lost. When power is
restored, the power manager will then be configured with the previously
saved parameters.
B
UTTON
B
UTTON
CHAPTER 4: Configuration
NOTES
37
Advertisement
Table of Contents
