Configuration Menus - Black Box PS568A User Manual

RACKMOUNT REMOTE POWER MANAGERS
The Plug Status screen will not display actual passwords. Instead, the
password column will display "defined" or "undefined."
Rackmount Remote Power Manager
Plug |Name
-------------------------------------------------------------------
1 |(undefined) |(undefined) |ON
2 |(undefined) |(undefined) |ON
3 |(undefined) |(undefined) |ON
4 |(undefined) |(undefined) |ON
5 |(undefined) |(undefined) |ON
6 |(undefined) |(undefined) |ON
7 |(undefined) |(undefined) |ON
8 |(undefined) |(undefined) |ON
"/H" for help.
RPM>
Figure 4-2. Plug Status screen—text interface.

4.3 Configuration Menus

As described in the sections that follow, the power manager's configuration
parameters can be selected via the Web browser interface or via the text interface.
Although the Web browser and text interface provide two separate means for
selecting parameters, both interfaces allow access to essentially the same set of
parameters, and parameters selected via one interface will also apply to the other.
• Web browser interface: Click on the Setup button in Figure 4-1 to gain access
to the configuration menus. A row of buttons will appear along the left edge of
the screen. Click on the appropriate button to access the desired menu.
Newly selected parameters will not be activated until you click on the
Apply button.
Click on Switch Panel to return to the main status screen.
• Text interface: Refer to the Help screen (/H), then type in the appropriate
command to access the desired menu. When the configuration menu appears,
type in the number or letter for the parameter that you want to define and
follow the instructions in the resulting submenu.
20
NOTE
|Password |Status
NOTES
v1.41h Site ID: (undefined)
|Boot/Seq.Delay |Default
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
|
|ON |
|ON |
|ON |
|ON |
|ON |
|ON |
|ON |
|ON |