Web Server Parameters Menus - Black Box PS568A User Manual

TELNET PARAMETERS:
1. Service:
2. Telnet Port #:
Enter Selection,
Press <ESC> to Exit...
Figure 4-13. Telnet Parameters menu—text interface.
All parameters listed here are available for both the Web browser
interface and the text interface.
The Telnet Parameters menus allow the following parameters to be defined:
• Service: Enables/disables Telnet communication with the power manager.
When this item is off, users will not be able to contact the power manager via
Telnet. (The default value is on.)
• Port Number: Selects the TCP/IP port number that will be used for Telnet
connections. (The default value is 23.)
4.3.6 W S
EB ERVER
The Web Server Parameters menus are used to configure the internal Web server;
it allows the power manager to be operated via the Web browser interface.
• Web browser interface: Click on the Setup button to access the configuration
menus, and then click on the Web Server Parameters button. The Web Server
Parameters menu will appear (Figure 4-14). Once you select the appropriate
menu options, click on Apply to save the settings or Cancel to start over.
P M
ARAMETERS ENUS
On
23
NOTE
CHAPTER 4: Configuration
35