Telnet Parameters Menus - Black Box PS568A User Manual

RACKMOUNT REMOTE POWER MANAGERS
Mask #5 has priority over the other four masks. If mask #5 is set to deny
access to 255.255.255.255 (all wild cards), you will not be able to access
the Rackmount Remote Power Manager's command mode via the
network. Access will be allowed only via a local PC or an external
modem connected to the power manager's COM port.
When using the wild card address 255.255.255.255, make certain that at
least one higher priority mask permits access by your IP address.
4.3.5 T P
ELNET ARAMETERS
The Telnet Parameters menus are used to enable/disable Telnet access to the
power manager's command mode and select the TCP port for Telnet connections.
• Web browser interface: Click on the Setup button to access the configuration
menus, then click on the Telnet Parameters button to display the menu shown
in Figure 4-12. Once you select the appropriate menu options, click on Apply
to save the settings or Cancel to start over.
Figure 4-12. Telnet Parameters menu—Web browser interface.
• Text interface: Type /T and press Enter. The Telnet Parameters menu will
appear (Figure 4-13).
34
NOTE
M
ENUS