Table of Contents
Advertisement
RACKMOUNT REMOTE POWER MANAGERS
5. Operation
As discussed in Chapter 4, the Rackmount Remote Power Manager offers two
separate command interfaces: the Web browser interface and the text interface.
Both interfaces offer essentially the same command options and features, and
parameters defined via the Web interface will also apply when communicating via
the text interface (and vice versa).
5.1 Operation via the Web Browser Interface
When using the Web browser interface, all switching commands are invoked via
the Plug Status screen, which also displays the status of the power manager's
switched outlets.
5.1.1 T
P
S
S
HE
LUG
TATUS
CREEN
When you log into the power manager's command mode using a standard
JavaScript
®
enabled Web browser interface , the first screen that appears is the Plug
Status screen (or Switch Panel). The Plug Status screen (Figure 5-1) lists the
current on/off status of the power manager's switched outlets and provides a series
of buttons that are used to control on/off/boot switching of the outlets.
Figure 5-1. Plug Status menu—Web browser interface.
38
Advertisement
Table of Contents
