Test Switching Functions - Black Box PS568A User Manual

Rackmount Remote Power Manager
Display
/H Display Help Screen
/S Display Plug Status
/SH Display Network Status /C View/Set Serial Parameters
Control
/Boot <n> Boot Plug n
/On <n>
/Off <n>
/X Exit/Disconnect
+--------------------------------+ Utilities
|[n]=optional plug name or number| /I Reset Network Interface
|<n>=required plug name or number| /U Upgrade Firmware
|n+n or n n=plug n and plug n
|n:n=plug n through plug n
|*=all plugs
|,y=bypass "Sure [y/n]"
+--------------------------------+
RPM>
5.2.1 T S
EST WITCHING
You may want to perform the following tests to make sure that the power manager
is responding to commands:
• Reboot outlet: When communicating with the power manager via the text
interface, type /BOOT 1 and press Enter. The status indicator for plug 1
should go off, pause for a moment, and then go back on, indicating that the
boot cycle has been successfully completed.
• Switch outlet off: From the text interface, type OFF 1 and press Enter. The
status indicator for plug 1 should go off, indicating that the command has
been successfully completed. Leave plug 1 in the off state, then proceed to the
next step.
Figure 5-2. Help menu—text interface.
F
UNCTIONS
v1.41h Site ID: (undefined)
Configuration
/G View/Set General Parameters
/F [n] View/Set Plug Parameters
/N View/Set Network Parameters
/T View/Set Telnet Parameters
/W View/Set Web Server
/E Save Parameters
/R Recall Parameters
/DL Download Parameters to File
|
|
|
|
CHAPTER 5: Operation
41