Plug Parameters Menus - Black Box PS568A User Manual

RACKMOUNT REMOTE POWER MANAGERS
• Automated mode: When enabled, the power manager will execute switching,
reboot, and exit commands without displaying a confirmation prompt, status
screen, or confirmation messages. For more information, please refer to
Section 5.4. (The default value is off.)
When this option is enabled, security functions are suppressed, and
users are able to access configuration menus and control plugs without
entering a password. If security is a concern and the automated mode is
required, we recommend using the IP security feature (see Section 4.3.4)
to restrict access.
• Manual switch button: This button enables and configures the default button's
manual plug control function, but it does not affect the default button's ability
to reset parameters to default values. (The default value is on.)
- Off: Disables the manual plug control function.
- On: Enables manual plug control. When the manual switch button is pressed
and held for three seconds, all outlets will be toggled on or off.
• Command prompt: Allows the text interface command prompt to be set to the
default value of RPM, which stands for Remote Power Manager.
• Default parameters: Resets the power manager to its default settings.
4.3.2 P P
LUG ARAMETERS
The Plug Parameters menus are used to define plug names, plug passwords, and
boot/sequence delay times for each of the power manager's switched AC outlets.
• Web browser interface: Click on the Setup button to access the configuration
menus, then click on the Plug Parameters button. The Plug Parameters menu
will appear (Figure 4-5). Once you select the appropriate menu options, click
on Apply to save the settings or Cancel to start over.
24
NOTE
M
ENUS