Table of Contents
Advertisement
5.1.2 T
S
EST
WITCHING
You may want to perform the following tests to make sure that the power manager
is responding to commands:
• Reboot outlet: When communicating with the power manager via the Web
browser interface, select the button in the Boot column for plug 1, and then
click on Apply. The status indicator for plug 1 should go off, pause for a
moment, and then go back on, indicating that the boot cycle has been
successfully completed.
• Switch outlet off: From the Web browser interface, select the button in the Off
column for plug 1, and then click on Apply. The status indicator for plug 1
should go off, indicating that the command has been successfully completed.
Leave plug 1 in the off state, and then proceed to the next step.
• Switch outlet on: From the Web browser interface, select the button in the On
column for plug 1, and then click on Apply. The status indicator for plug 1
should then go back on, indicating that the command has been successfully
completed.
• Default: This appears as On if the default parameters are enabled or Off if the
default parameters are not enabled.
5.1.3 I
C
NVOKING
OMMANDS
To invoke on/off/boot commands or view plug status via the Web browser
interface, proceed as follows:
1. Access the power manager's command mode as described in Section 4.2.1.
2. When the Plug Status screen (Figure 5-1) appears, note that the screen
includes a status field and on/off/boot controls for each of the power
manager's switched AC outlets.
When boot/on/off operations are initiated, boot/sequence delay times
will be applied as described in Section 4.3.2.
Users who log into command mode using a plug password will only be
allowed to issue commands to the plugs allowed by that password.
3. Switching plugs on: To switch one or more plugs on, click the On button next
to the desired plug(s), then click on Apply.
a. To switch all plugs on, click the On button in the All Plugs row, then click
on Apply.
F
UNCTIONS
NOTES
CHAPTER 5: Operation
39
Advertisement
Table of Contents
