The Plug Status Screen; Switching And Reboot Commands - Black Box PS568A User Manual

RACKMOUNT REMOTE POWER MANAGERS
• Switch outlet on: From the text interface, type ON 1 and press Enter. The
status indicator for plug 1 should then go back on, indicating that the
command has been successfully completed.
5.2.2 T P S
HE LUG TATUS
When you log into the power manager's command mode using the text interface,
the first screen displayed after login is the Plug Status screen. This screen (Figure
5-3) lists the current status of the power manager's switched AC outlets and
displays the firmware version and currently defined site ID message.
Rackmount Remote Power Manager
Plug |Name
-------------------------------------------------------------------
1 |(undefined) |(undefined) |ON
2 |(undefined) |(undefined) |ON
3 |(undefined) |(undefined) |ON
4 |(undefined) |(undefined) |ON
5 |(undefined) |(undefined) |ON
6 |(undefined) |(undefined) |ON
7 |(undefined) |(undefined) |ON
8 |(undefined) |(undefined) |ON
"/H" for help.
RPM>
Figure 5-3. Plug Status screen—text interface.
Normally, the Plug Status screen will also be redisplayed each time a command is
successfully executed.
If desired, the automated mode (see Section 5.4) can be enabled to
suppress the display of the Plug Status screen after each command.
5.2.3 S
WITCHING AND
These commands can boot or toggle the power manager's switched plugs. Plugs
may be specified by name or number.
42
S
CREEN
|Password
R C
EBOOT OMMANDS
v1.41h Site ID: (undefined)
|Status |Boot/Seq.Delay |Default
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
|0.5 Secs
NOTE
|
|ON |
|ON |
|ON |
|ON |
|ON |
|ON |
|ON |
|ON |