SMA SUNNY BOY 3.8-US User Manual page 22

5 Using the Inverter User Interface
Layout of the installation assistant
A
C
Figure 3: Layout of the installation assistant
Position Designation
A Configuration steps
B User information
C Configuration field
Requirement:
☐ When configuring after completion of the first ten operating hours, the SMA Grid Guard code
must be available (see "Application for SMA Grid Guard Code" at www.SMA-Solar.com).
Procedure:
1. Activate the user interface (see Section 5.1, page 20).
2. Log in as Installer.
3. Select the menu User Settings (see Section 5.3, page 25) on the start page of the user
interface.
4. In the context menu, select [Start the installation assistant].
☑ The Installation Assistant will open.
28 SB30-77-1SP-US-40-BA-en-11
Description
Overview of the installation assistant steps. The number of
steps depends on the type of device and the additionally
installed modules. The current step is highlighted in blue.
Information about the current configuration step and the
setting options of the configuration step.
You can make settings in this field.
SMA Solar Technology America LLC
B
User Manual