Setting Up A Mailbox; Table 4-1 Accessing Mailbox Administration Functions (See Also Figure 4-1) - Siemens HiPath 3000 User Manual

Nur für den internen Gebrauch
The following functions are available to the system administrator:
Function
Set up a mailbox
Delete a mailbox
Query the status of a mailbox
Table 4-1 Accessing Mailbox Administration Functions (see also Figure 4-1)
Note:
>
The super-user can also access the administration mode of an individual mailbox by
entering * # followed by the code number of the mailbox.
4.2.1.1

Setting up a Mailbox

After the system administrator has accessed the super-user function and entered the valid
code number, he or she can set up a new mailbox by pressing 5 (see Figure 4-1). The admi-
nistrator is guided through the corresponding procedure via appropriate system announce-
ments.
To set up a new mailbox, a mailbox number must be entered. The system checks to make sure
the entered number is valid or has been previously assigned. A system message will help guide
the super-user if needed.
If the entered number is valid and has not been previously assigned, the system asks for a mail-
box class for the new mailbox. After the class has been entered, the mailbox is installed auto-
matically by the system.
Note:
>
The user can now access his or her newly set up mailbox by using the standard co-
de. The mailbox does not become active and is unable to record messages until its
owner has accessed the mailbox for the first time. The owner must therefore be in-
formed this his or her mailbox has been set up.
The HiPath 3000 Manager enables the individual configuration of all features for a
new mailbox.
User Manual
Administering Mailboxes with the Super-User Function
Accessing the Super-User Function
XPR100us04.fm
Key
5
6
4
4-3