Signalization Of Incoming Messages - Siemens HiPath 3000 User Manual
Hide thumbs
Also See for HiPath 3000:
- Operating instructions manual (20 pages) ,
- Manual (56 pages) ,
- Administrator's manual (46 pages)
Table of Contents
Advertisement
XPR100us01.fm
Introduction
Nur für den internen Gebrauch
Signalization of Incoming Messages
1.4
Signalization of Incoming Messages
A new message is automatically indicated with the message waiting lamp (Message Waiting
Indicator)* of the corresponding HiPath 3000 extension. For telephones without MWI-LED,
users hear a special dial tone*.
The signalization is set upon receipt of the first message and is automatically deleted after the
last message has been heard.
If the notification call has been set up and activated for the mailbox, this is additionally signali-
zed on the telephone.
* Depending on the configuration of HiPath 3000.
User Manual
1-3
Advertisement
Table of Contents
