Table of Contents
Advertisement
Home Medical Hub Setup
Follow the instructions below to set up the Opioid Halo system. The Home Medical Hub is set up in two
(2) steps.
Step 1: Pair the Masimo Halo App to the Home Medical Hub using Bluetooth.
Step 2: Connect the Home Medical Hub to the wireless network (Wi-Fi).
WARNING: Place the Home Medical Hub in a safe location so as not to fall on anyone and where the
alarm sounds can be heard.
1.
Following the on-screen instructions, connect the Home Medical Hub to a power outlet using
the AC power cord and adapter and select Continue.
Note: The Home Medical Hub Status LED is white when powered on.
2.
Hold your smart phone near the Home Medical Hub during setup. When complete, the App
screen will display: Success.
Note: If the Bluetooth connection fails, hold the smart phone closer to the Home Medical Hub
and try to reconnect. If the Home Medical Hub cannot connect, see Troubleshooting on
page 39.
3.
Next, connect to your Wi-Fi by selecting Set Up Wi-Fi and follow the app instructions.
4.
Select the wireless Network and enter the Password. Select Continue.
Note: To view available Wi-Fi networks within range of the Home Medical Hub, click the
Network field and select from the displayed list
5.
Once the Wi-Fi connection is established, the Home Medical Hub Wi-Fi Setup Successful
screen will appear. If the Home Medical Hub cannot connect, follow the on-screen
instructions to verify the network and try again or view Troubleshooting on page 39.
6.
Next, you will need to attach the Masimo Sensor and connect it with the Home Medical Hub.
See Masimo Sensor Setup on page 24 for additional instructions.
23
Advertisement
Table of Contents
Troubleshooting
