Samsung MULTIXPRESS CLX-9251 Series Service Manual page 440

A3 color copier

Hide thumbs Also See for MULTIXPRESS CLX-9251 Series:

Table of Contents

4. Troubleshooting

26) How to adjust image distortion

Image distortion occurs when paper is fed from DADF.

Troubleshooting

1) Loosen the 4 screws of the left hinge then loosen the 4 screws of the right side. Adjust the DADF.

2) Perform a copy job from the DADF and see if image distortion occurs. Repeat steps 1 and 2 if there is distortion.

3) If image distortion is removed then tighten the hinges' screws.

Troubleshooting