3.3.17. Regi_MP Drive unit
1. Remove the rear cover. (Refer to 3.3.2)
3.3.18. Toner Supply Drive unit
1. Remove the rear cover. (Refer to 3.3.2)
2. Remove the Main board shield. (Refer to 3.3.12)
3. Unplug the connector. Remove 2 screws. And then
remove the Toner supply drive unit.
NOTE
•
To remove K Toner supply drive unit, first remove
the main drive unit.
•
The toner supply drive units are exchangeable.
Copyright© 1995-2016 SAMSUNG. All rights reserved.
2. Unplug the connector. Remove 3 screws. And the
remove the Regi_MP Drive Unit.
3. Disassembly and Reassembly
3-27