Samsung MULTIXPRESS CLX-9251 Series Service Manual page 438

A3 color copier

Hide thumbs Also See for MULTIXPRESS CLX-9251 Series:

Table of Contents

4. Troubleshooting

24) Device does not perform initial setup

Symptom : Factory clear or memory clear is performed. Device does not perform initial setup after rebooting.

Firmware version with problem

UI : V5.08.10.04_20120605.19 or earlier

Main F/W: V11.11.06.02 06-29-2012 or earlier

Cause : S/W defect

Troubleshooting

1) Turn off the device.

2) Open side cover.

3) Turn on the device as Power Key of UI is pressed.

4) Complete System Recovery (HDD format) and reboot the device.

Troubleshooting