Samsung MULTIXPRESS CLX-9251 Series Service Manual page 160

3. Disassembly and Reassembly
7. Remove 2 screws.
8. Remove 6 screws. Remove the Holder-Bias. And
remove the Bracket-Fuser Bottom.
9. Remove 2 screws. Unplug the thermostat connector.
3-38
10. Release the pin connector with the tweezers.
CAUTION
• When reassembling the pin connector, make sure
the colors are positioned as shown above.
• Check the connector assembly status. If there is
a wrong connection, a operation error or a fire
can happen.
• Be careful not to bend the connector.
11. Lift up the thermostat holder Assy.
12. Remove 3 screws. Lift up and release the thermostat
holder.
Copyright© 1995-2016 SAMSUNG. All rights reserved.