Samsung MULTIXPRESS CLX-9251 Series Service Manual page 335

A3 color copier

Hide thumbs Also See for MULTIXPRESS CLX-9251 Series:

Table of Contents

► Error Code

► Error message

Tray 1 cassette is pulled out. Insert it properly.

Tray 1 is pulled out or the auto size sensor connector is not connected or broken.

► Troubleshooting method

1) Remove and insert Tray1 correctly.

2) If Tray1 is not locked or pulled out without holding the locking lever, remove Tray1.

3) Check if foreign substance or paper is inside the space between Tray1,2. If so, please remove it.

4) If the problem persists, check that the auto size sensor is connected properly.

(Refer to 3.3.20. Auto Size sensor)

5) If the problem persists, replace the main board(JC92–02452A).

4. Troubleshooting

Troubleshooting