Table of Contents
Advertisement
③ The blinking pattern of two of the lower LEDs indicates the current setting value
( § 12.2.1 to § 12.2.8), selected by pressing
See the following pages for the specific indication corresponding to each setting
value.
The blinking position changes each time you press
necessary to select the desired setting value.
UPS status
The beeper sounds once at each
press.
The pattern of blinking lower
LEDs changes.
④ Press
CLEAR
Two beeps sound, the setting status is memorized, and normal operation resumes.
Note
To reset all settings to their defaults (initial settings), press and hold
than 3 seconds after the beeper sounds in step 4 above.
for at least 3 seconds when finished making settings.
- 31 -
BATT.TEST .
BATT.TEST , so press it as
Press momentarily
CLEAR
for more
Advertisement
Table of Contents
