Operation; Starting Operation (Normal Start) - Sanyo Denki SANUPS ASE10S1HU002-08 Instruction Manual

9.

Operation

◆ 9.1

Starting Operation (Normal Start)

① Turn ON the distribution panel breaker of the AC source.
② Turn ON the
Press the ON side
Caution
Always turn on the
problems may occur as a result of inadequate power capacity.
UNIT SW on all UPS Units.
UPS Unit - Rear
UNIT SW
ON
OFF
UNIT SW on all UPS Units. If a UPS Unit is not switched on,
- 16 -