SATO Argox XM4 Series User Manual page 82

XM4 Series Printer
User Manual
3. Alternatively, please reduce the occurrence of ribbon wrinkles through the ribbon
wrinkle adjustment mechanism on both ends.
For Ribbon Rewind
4. Also alternatively, if you need to print smaller media, you can use the latch for the
TPH of the printer to secure the small-sized media to prevent printing wrinkles
during printing. You can loosen and remove the screw on the right side, move the
right cam to the left, and then lock it back using the screw you just removed.
5. Print a test page to check print quality. If the quality is improved, stop the
adjustment; if not, continue with next step.
6. If the test print appears as below, remain the screw at the right of Ribbon Bracket
fixed, then loose the screw at the left, and gradually fine-tune upward, until the
print quality gets improved.
For Ribbon Supply
77
Latc
h
Cam