SATO Argox XM4 Series User Manual page 47

XM4 Series Printer
User Manual
Remarks:
➢ DHCP
Range: Disable / Enable
If printer has been connected to a router, IP address will be assigned automatically by DHCP server
after power on. If printer is not connected to a router, with DHCP disabled, settings of IP ADDRESS,
SUBNET MASK, and DEFAULT GATEWAY settings will be available on LCD. Every time when DISABLE is
changed to be ENABLE, LCD will prompt "ETHERNET CARD UPDATE FINISH...". Then please reboot the
printer.
➢ IP ADDRESS / SUBNET MASK / DEFAULT GATEWAY
Range: xxx.xxx.xxx.xxx (0~255)
(MAC ADDRESS RANGE: Read only)
When DHCP is disabled, default IP address is 192.168.1.100. If "_" sign appears, it means that the DHCP
setting is disabled. On the contrary, the DHCP setting is enabled.
1. FEED/CONFIG.:
Change contents. (ex. from 000.000.000.000 to 255.255.255.255)
2. PAUSE/CALIBR.:
Shift the position of the "_" character. (ex. from 255.255.255.255 to 255.255.255.255)
3. CANCEL/RESET:
Select next function setting. ("_" sign must at the third digit of each parameter, for example, xxx).
4. To change IP ADDRESS or SUBNET MASK, enter DEFAULT GATEWAY setting, press CANCEL button
once; LCD will prompt "ETHERNET CARD UPDATE FINISH...".
Then reboot the printer.
42