SATO Argox XM4 Series User Manual page 22

XM4 Series Printer
User Manual
Load Media in Peel Off Mode
Steps 1 to 3 are the similar to "Standard Mode".
1. Lift the top cover to expose the media compartment.
2. Load a roll of media into the media supply spindle and slide the media guide
inward.
3.
Rotate the head latch counterclockwise and open the outside media guide for
media loading.
4. Remove enough labels from the leading end of the media roll to expose 6 inches
of liner.
5. Guide the media liner under the printhead module. For more specific media
guidance, refer to Step 4 in Standard Mode.
Print Head
Module
Media
17