SATO Argox XM4 Series User Manual page 21

XM4 Series Printer
User Manual
5. Return the outside media guide and hook the head latch.
Print Head Module
Head Latch
Roller
6. Close the top cover.
7. Press the FEED button if the printer is already on.
Media Guide
Two Ring
N
ote Make sure the label length of the
die-cut media is at least 25 mm
(1") or longer for direct thermal
printing in tear-off mode with
perforation.
Important
After the media is loaded, please
perform media calibration to calibrate
the label sensor before printing.
16
Paper Sensor
Guide Module
Outside Media Guide