Printing Wrinkle Adjustment - SATO Argox XM4 Series User Manual

XM4 Series Printer
User Manual

5.2.3 Printing Wrinkle Adjustment

During printing, ribbon may wrinkle and cause abnormal printing quality. The
following describes how to solve ribbon wrinkle accordingly.
Once the printouts as above appear, the possible cause may be the unequal positions
of Ribbon Bracket, which needs to be adjusted properly to make its heights equally
the same at both sides. Steps to adjust are as below:
1. Loose the screws at both sides and rotate counter-clockwise:
2. Make sure the Ribbon Bracket is at its lowest position first; then tight up the
screws by rotating clockwise.
76