Buttons - SATO Argox XM4 Series User Manual

XM4 Series Printer
User Manual
LCD Display READY
MEDIA OUT Blinking
PAPER JAM Blinking

1.4.2 Buttons

There are three buttons, each with two basic functions.
Button
• Feed a label
FEED
• Pause printing
PAUSE
• Interrupt and delete a print task
CANCEL
MEDIA RIBBON
Blinking ON
Blinking ON
Function 1
8
Description
Media is not installed or used up.
Printer fails to detect the media
gap. The media sensor is out of
range during calibration. The label
has run out. The last label has been
issued normally and the label has
run out.
A paper jam occurred during paper
feed.
Function 2
• Press again to resume printing.
• Press and hold for 2 seconds to
enter the printer setup menu.
• Force printer to continue after
an error is solved.
• Press and hold for 2 seconds to
reboot the printer.