How To Replace The Control Panel Assembly - GRAPHTEC FC8000-60 Service Manual

6. DISASSEMBLY AND REASSEMBLY

6.1.3 How to Replace the Control Panel Assembly

How to detach the control panel assembly
(1) Detach the right side cover (see Subsection 6.1.1).
(2) Remove the three M3L6 binding head screws holding the control panel assembly from the top of the
center cover.
M3L6 binding head screw
Control panel assembly
(3) Disconnect the two flexible cables from the control panel board.
Flexible cable
Control panel board
How to reinstall the control panel assembly
(1) Reattach the control panel assembly in the reverse order in which it was detached.
FC8000-UM-251-9370 6-3