GRAPHTEC FC8000-60 Service Manual page 106

Cutting plotter
Table of Contents

Advertisement

Error
Error Display
code
E04013
E04013 ARMS
MARK SCAN ERROR!
NOT ENOUGH LENGTH
IN +Y DIRECTION
E04014
E04014 ARMS
MARK SCAN ERROR!
EXCEED CUTTING
AREA DURING
+Y DETECTION
E04015
E04015 ARMS
MARK SCAN ERROR!
NOT ENOUGH LENGTH
IN -Y DIRECTION
E04016
E04016 ARMS
MARK SCAN ERROR!
EXCEED CUTTING
AREA DURING
-Y DETECTION
E04017
E04017 ARMS
MARK SCAN ERROR!
MOVING DESTINATION
IS OUT OF AREA
E04018
E04018 ARMS
MARK SCAN ERROR!
MEDIA SET LEVER IS
LOWERD
JOB IS CANCELD
E04019
E04019 ARMS
CANCEL IS SELECTED
AT MOVE DISTANCE
E04020
E04020 ARMS
MARK SCAN ERROR!
DETECTION ERROR
JOB IS CANCELED
E04021
E04021 ARMS
MARK SCAN ERROR!
MARK IS NOT FOUND
IN EFFECTIVE AREA
E04022
E04022 ARMS
JOB IS CANCELED
E04023
E04023 ARMS
MARK SCAN ERROR!
MARK WAS NOT FOUND
FC8000-UM-251-9370
Cause
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
It has exceeded detection area
while detecting the registration
mark.
Media set lever was lowered.
There was cancel operation by the
user.
There is a defect in the detection
settings value.
Registration mark was not
detected in the auto detection
area.
There was cancel operation by the
user.
Registration mark was not
detected.
8-12
8. TROUBLESHOOTING
Solution
Check the media.
Check the print position of the
registration mark.
Check the media.
Check the print position of the
registration mark.
Check the media.
Check the print position of the
registration mark.
Check the media.
Check the print position of the
registration mark.
Check the media.
Check the print position of the
registration mark.
Reload the media and try
again.
Check the settings value.
Check the media. Check the
print position of the registration
mark.
Readjust the sensor level.
Change the color of the
registration mark.
Check the media.
Check the print position of the
registration mark.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fc8000-75Fc8000-100Fc8000-130Fc8000-160

Table of Contents