Siemens SIPROTEC 7UM62 Manual page 49

Addr. Parameter
144 INV.UNDERVOLT.
145 df/dt Protect.
146 VECTOR JUMP
150 S/E/F PROT.
151 O/C PROT. IEE>
152 SEF 3rd HARM.
153 100% SEF-PROT.
154 O/C PROT IEE-B
155 INTERTURN PROT
160 ROTOR E/F
161 REF 1-3Hz
165 STARTUP MOTOR
166 RESTART INHIBIT
170 BREAKER FAILURE
171 INADVERT. EN.
172 DC PROTECTION
SIPROTEC, 7UM62, Manual
C53000-G1176-C149-7, Release date 03.2010
Setting Options
Disabled
Enabled
Disabled
2 df/dt stages
4 df/dt stages
Disabled
Enabled
Disabled
non-dir. U0
non-dir. U0&I0
directional
Disabled
with IEE1
with IEE2
Disabled
Enabled
Disabled
Enabled
Disabled
with IEE1
with IEE2
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Side 1
Side 2
Disabled
Enabled
Disabled
Enabled
Default Setting
Enabled Inverse Undervoltage Protection
Up<
2 df/dt stages Rate-of-frequency-change protec-
tion
Enabled Jump of Voltage Vector
non-dir. U0&I0 Stator Earth Fault Protection
with IEE2 Sensitive Earth Current Protection
Enabled Stator Earth Fault Prot. 3rd Har-
monic
Enabled 100% Stator-Earth-Fault Protec-
tion
with IEE2 Sensitive Earth Current Protection
B
Enabled Interturn Protection
Enabled Rotor Earth Fault Protection (R,
fn)
Enabled Rotor Earth Fault Protection (1-
3Hz)
Enabled Motor Starting Time Supervision
Enabled Restart Inhibit for Motors
Side 2 Breaker Failure Protection
Enabled Inadvertent Energisation
Enabled DC Voltage/Current Protection
Functions
2.4 Functional Scope
Comments
49