Adjusting The Picture; Picture Freeze / No Show Function; Cursor Function - Sanyo PLC-XU10N Owner's Manual

ZOOM Adjustment
Press ZOOM button on the Top Control or the Remote Control to
1
turn into the ZOOM mode.
Adjust the size of the image by pressing POINT UP/DOWN
2
button.
Press UP button to have the image larger, and press DOWN
button to have the smaller.
FOCUS Adjustment
Press FOCUS button on the Top Control or the Remote Control to
1
turn into the FOCUS mode.
Adjust the focus of the image by pressing POINT UP or DOWN
2
button.

PICTURE FREEZE / NO SHOW FUNCTION

Press the FREEZE / NO SHOW button on the Remote Control Unit to
turn the picture remained on-screen or turn the picture into black image.
These function is cancelled when the FREEZE / NO SHOW button is
pressed again or any other function button is pressed.
This projector can display a cursor by pressing cursor button on the
Remote Control. The cursor can be controlled with the POINT buttons.
To terminate the Cursor Function, press CURSOR button again.
NOTE : The cursor settings set with the "Media Card Imager" is not
available in this projector.
ADJUSTING THE IMAGE

CURSOR FUNCTION

BASIC OPERATION
ZOOM
The message disappears after 4 seconds.
FOCUS
The message disappears after 4 seconds.
NORMAL mode
FREEZE mode
NO SHOW mode
Cursor
23