Sound Adjustment - Sanyo PLC-XU10N Owner's Manual

BASIC OPERATION
Sound Volume Adjustment
Press the VOLUME (+/–) buttons (located on the Top Control or on the
Remote Control Units) to adjust the volume. The Volume dialog box
appears on the screen for a few seconds.
(+) button to increase the volume, and (–) button decreasing.
Sound Mute Setting
Press the MUTE button on the Remote Control Units to cut off the
sound. To restore the sound to its previous level, press again or press
Volume buttons.
Press the MENU button and the ON-SCREEN MENU will appear.
1
Press the POINT LEFT/RIGHT buttons to select SOUND
and press the SELECT button. Another dialog box SOUND
ADJUST Menu will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
2
Move the arrow to the item that you want to select by pressing the
POINT UP/DOWN buttons.
Move the arrow to
Volume
POINT UP/ DOWN buttons. To increase the volume,
point the arrow to
To decrease the volume point the arrow to
press the SELECT button.
To cut off the audio sound, point the arrow to "Mute" and
Mute
then press the SELECT button. The Mute display is
changed On from Off and the sound is cut off. To restore
the sound to its previous volume level, set the Mute to
Off.
24

SOUND ADJUSTMENT

Direct Operation
Menu Operation
or of "Volume" by pressing the
and then press the SELECT button.
The display disappears after 4 seconds.
and then Move the arrow to
the item and then
press the SELECT
button.
It indicates the roughly
level of the volume.
Press the MUTE button to set
the Mute function On or Off.
It indicates the
roughly level of the
item.
Move the arrow to
or
and press the
SELECT button.
It closes the
Sound Menu.