Table of Contents
Advertisement
SETTING
Press the MENU button and the ON-SCREEN MENU will appear.
1
Press the POINT LEFT/RIGHT buttons to select SETTING
and press the SELECT button. Another dialog box
SETTING Menu will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
2
Move the arrow to the item that you want to set, and then press
the SELECT button to set it "On" or "Off".
When this function is in the "On" position, this projector
Blue back
will produce a blue image without video noise on the
screen when the video source is unplugged or turned off.
When this function is in the "On" position, the On-Screen
Display
Displays always appear when adjustments are made.
(The following displays disappear by switching this
function "Off.")
Preparation Display
Mode Display
Volume Display
Mute Display
Normal Display
When this function is in the "On" position, the top / bottom
Ceiling
and the left / right reversed picture is provided to project
the image from a ceiling mounted projector.
When this function is in the "On" position, the left / right
Rear
reversed picture is provided to project the image to a rear
projection screen.
Turn this function "On" position in the SETTING menu.
Split wipe
The picture will change into next one by sliding black
image side ways like drawing the black curtains when the
input source is turned into another one.
The Lamp age function is designed to reset the lamp
Lamp age
replacement monitor timer. When replacing the lamp,
reset the lamp replacement monitor timer by using this
function. (Refer to page 43.)
The language used in the ON-SCREEN MENU is selectable
from among English, German, French, Italian, Spanish and
Japanese.
Press the MENU button and the ON-SCREEN MENU will appear.
1
Press POINT LEFT/RIGHT buttons to select LANGUAGE and
press the SELECT button. Another dialog box LANGUAGE Menu
will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
2
Move the arrow to the language that you want to set, and then
press the SELECT button.
40
SETTING MENU
(The Number-counting down Display)
SETTING LANGUAGE
B
T
T B
R
L
L R
Move the Pointer to the
language that you want
to set, and then press
the SELECT button.
Set the Pointer
to the item, and
then press the
SELECT button.
Advertisement
Table of Contents
