Picture Image Adjustment; Picture Screen Adjustment - Sanyo PLC-XU10N Owner's Manual

VIDEO MODE
Adjusting the Picture Image
Press the MENU button and the ON-SCREEN MENU will appear.
1
Press the POINT LEFT/RIGHT buttons to select IMAGE
press the SELECT button. Another dialog box PICTURE IMAGE
ADJUSTMENT Menu will appear.
2 Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to
pressing the POINT UP/DOWN buttons. To increase the value,
point the arrow to
decrease the value point the arrow to
SELECT button.
Point to
Colour
adjust the image deeper. (From 0 to 63.)
Point to
Tint
to adjust more green. (From 0 to 63.)
Point to
Contrast
adjust the image deeper. (From 0 to 63.)
Point to
Brightness
adjust the image brighter. (From 0 to 63.)
Point to
sharpness
adjust the image sharper. (From 0 to 63.)
Each of the keys operates as follow.
Reset
It recalls the data previously adjusted.
Stored
It stores the data in the memory.
Quit
It closes the PICTURE IMAGE ADJUSTMENT Menu.
The normal picture level is preset on this projector by the factory and
can be restored anytime by pressing the NORMAL button (located on
the Top Control or on the Remote Control). The "Normal" display will
be displayed on the screen for a few seconds.
This projector has a picture screen resize function, which enables you to display the image in desirable size.
Press the MENU button and the ON-SCREEN MENU will appear.
1
Press the POINT LEFT/RIGHT buttons to select SCREEN
and press the SELECT button. Another dialog box PICTURE
SCREEN ADJUSTMENT DISPLAY will appear.
2 Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the screen size that you want to set, and then
press the SELECT button.
Normal Video Image size with 4 x 3 aspect ratio .
Regular
It compresses the image vertically to Wider Video Image
Wide
size with 16 x 9 aspect ratio.
32

PICTURE IMAGE ADJUSTMENT

or of the item that you want to change by
and then press the SELECT button. To
to adjust the image lighter, and select
to adjust the colour more purple, and select
to adjust the image lighter, and select
to adjust the image darker, and select
to adjust the image softer, and select
Normal Function

PICTURE SCREEN ADJUSTMENT

and
and then press the
to
to
to
to
It indicates the
roughly level of
the item.
Move the arrow to
or
the SELECT
button.
It closes the PICTURE
IMAGE ADJUSTMENT
Menu.
Normal
Move the pointer to the
item that you want to
set, and then press the
SELECT button.
and press