Table of Contents
Advertisement
PICTURE IMAGE ADJUSTMENT
Adjust Picture Image Manually
Press the MENU button and the ON-SCREEN MENU will appear.
1
Press the POINT LEFT/RIGHT buttons to select IMAGE
press the SELECT button. Another dialog box PICTURE IMAGE
ADJUSTMENT Menu will appear.
Press the POINT DOWN button and a red-arrow icon will appear.
2
Move the arrow to
or
pressing the POINT UP/DOWN buttons. To increase the value,
point the arrow to
and then press the SELECT button. To
decrease the value point the arrow to
SELECT button.
Fine sync
Adjust the picture as necessary to eliminate flicker from the display.
(From 0 to 127.) This item can be adjusted by pressing the FINE
SYNC. button on the Top Control or the Remote Control Units.
Total dots
The number of the total dots in one horizontal period. Adjust the
number to match your PC image.
White Balance (Red / Green / Blue)
Point to
to adjust the color of image lighter, and select
the image deeper. (From 0 to 63.)
Contrast
Point to
to adjust the image lighter, and select
image deeper. (From 0 to 63.)
Brightness
Point to
to adjust the image darker, and select
image brighter. (From 0 to 63.)
Each of the keys operates as follow.
Reset
It recalls the data previously adjusted.
Stored
It stores the adjusted data in the memory.
Quit
It closes the PICTURE IMAGE ADJUSTMENT Menu.
Normal Function
The normal picture level is preset on this projector by the factory and
can be restored anytime by pressing the NORMAL button (located on
the Top Control or on the Remote Control Units). The "Normal" display
will be displayed on the screen for a few seconds.
of the item that you want to change by
and then press the
to adjust the
to adjust the
and
to adjust
Normal
MCI MODE
It indicates the
roughly level of
the item.
Move the arrow to
or
and press
the SELECT
button.
It closes the PICTURE
IMAGE ADJUSTMENT
Menu.
35
Advertisement
Table of Contents
