Operating On-Screen Menu - Sanyo PLC-XU10N Owner's Manual

OPERATING ON-SCREEN MENU

HOW TO OPERATE ON-SCREEN MENU
You can control and adjust this projector through ON-
SCREEN MENU. Refer to the following pages to operate
the each adjustment on the ON-SCREEN MENU.
1 MOVING THE POINTER
Move the pointer (see the NOTE below) by pressing POINT
button(S) on the TOP CONTROL or the REMOTE
CONTROL(S).
2 SELECT THE ITEM
Select the item by pressing SELECT button.
NOTE :Pointer is the icon on the ON-SCREEN Menu to
select the item. See the figures on the section
"FLOW OF ON-SCREEN MENU" below.
Display ON-SCREEN MENU
1 Press MENU button to display the ON-SCREEN MENU (MENU
BAR). The red frame is the POINTER.
Select the MENU
2 Move the POINTER (red frame) to the ITEM ICON that you want
to select by pressing POINT RIGHT/ LEFT buttons.
3 Select the ITEM by pressing SELECT button. The dialog box of
the ITEM appears.
Control and adjust through ON-SCREEN MENU
4 Move the POINTER downward by pressing POINT DOWN button.
(The shape of POINTER become an arrow.)
5 Move the POINTER to the ITEM that you want to adjust and
adjust the ITEM by pressing SELECT button.
Refer to the following pages for details of respective adjustments.
FLOW OF ON-SCREEN MENU
BEFORE OPERATION
WIRELESS REMOTE CONTROL
POINT BUTTON
Used to move the
Pointer to UP/ DOWN/
RIGHT/ LEFT.
TOP CONTROL
SELECT
MENU BAR
POINTER
SELECT
(red frame)
BUTTON
POINTER
(red frame)
POINT
DOWN
BUTTON
SELECT BUTTON
Used to select the item.
SELECT BUTTON
Used to select the item.
POINT BUTTON
Used to move the Pointer
to UP/ DOWN/ RIGHT/
LEFT.
ITEM ICON
MENU
POINTER
19