Table of Contents
Advertisement
VIDEO MODE
Press the MODE button on the Top Control or the VIDEO button on the
Remote Control Units. Select the Mode among COMPUTER, VIDEO, or
MCI mode.
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select Video
the SELECT button.
1
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select SYSTEM and
press the SELECT button. Another dialog box VIDEO SYSTEM
Menu will appear. (The display also appears by pressing the
SYSTEM button on the Top Control or the Remote Control Units.)
Press the POINT DOWN button and a red-arrow icon will appear.
2
Move the arrow to "Auto", and then press the SELECT button.
Auto
The projector automatically detects the incoming Video system, and
adjusts itself to optimize its performance.
When the Video System is PAL-M select the system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M
If the projector cannot reproduce the proper video image, it is
required to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, or PAL-M.
SELECTING VIDEO MODE
Direct Operation
Menu Operation
SELECTING COLOR SYSTEM
and press
This box indicates
the system being
selected.
MODE button
COMPUTER
MCI
VIDEO
31
Advertisement
Table of Contents
