Top Controls And Indicators - Sanyo PLC-XU10N Owner's Manual

BEFORE OPERATION
LAMP INDICATOR
This indicator is lit in dim when
the projector is turned on.
And the light is brightened
when the projector is in stand-
by mode.
MENU BUTTON
Used to active or terminate the
MENU operation.
(Refer to P19.)
AUTO IMAGE BUTTON
Used to operate AUTO IMAGE
function.
(Refer to P29.)
FOCUS BUTTON
Used to select focus adjust.
(Refer to P23.)
PAGE BUTTONS
Used to move next/previous
page of the data in the memory
card plugged into PC CARD
SLOT. These buttons are used
to stop or resume AUTO-PLAY
function. Page buttons are
activated in MCI mode.
(Refer to P34.)
18

TOP CONTROLS AND INDICATORS

LAMP REPLACE INDICATOR
This indicator turns to yellow
when the life of the projection
lamp draws to an end.
(Refer to P43.)
LAMP REPLACE
LAMP
MENU
AUTO IMAGE
FOCUS
PAGE ZOOM
ZOOM BUTTON
Used to select zoom adjust.
(Refer to P23.)
WARNING TEMP. INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
(Refer to P42.)
WARNING TEMP.
READY
ON–OFF
SELECT
NORMAL
+
MODE VOLUME
–
MODE BUTTON
Used to select input source.
(Computer, Video and MCI)
(Refer to P25 and 31.)
READY INDICATOR
This indicator is lit in green
when the projector is ready to
be turned on.
POWER ON–OFF BUTTON
Used to turn the projector on
or off. (Refer to P22.)
POINT BUTTONS
Used to move the pointer.
(Refer to P19.)
SELECT BUTTON
Used to execute the item
selected or to adjust the values
in certain items on the MAIN
MENU DISPLAY.
NORMAL BUTTON
Used to reset to normal picture
adjustment preset by factory.
(Refer to P29 and 32.)
VOLUME BUTTONS
Used to adjust volume.
(Refer to P24.)