Setting Up The Projector - Sanyo PLC-XU10N Owner's Manual

SETTING-UP THE PROJECTOR
This projector is basically designed to project on a flat projection surface.
The projector can be focused from 4.6'(1.4m) ~ 35.4'(10.8m).
Refer to the figure below to adjust the screen size.
35.4' (10.8m)
300"
230"
H1
H2
30"
Screen Size
(W x H) mm
609 x 457
Height (H1) 17.1"(435mm)
Height (H2)
0.9"(22mm)
ROOM LIGHT
The brightness in the room has a great influence on the quality of a picture. Adjust the light little darker, and
fine pictures are provided.
Picture tilt and projection angle can be adjusted by
twisting ADJUSTABLE FEET. Projection angle can be
adjusted 0 to 2 degrees by rotating Adjustable Feet.
Positioning the Projector
24.0' (7.3m)
18.0' (5.5m)
200" 11.8' (3.6m)
150"
100"
154"
115"
77"
60" 100"
1219 x 914 2032 x 1524
34.3"(870mm) 57.1"(1451mm)
1.7"(44mm) 2.9"(73mm)
Adjustable Feet
4.6' (1.4m)
40"
30"
150" 200"
3048 x 2286 4064 x 3048
85.7"(2177mm) 114.3"(2903mm)
4.3"(109mm) 5.7"(145mm)
UP
DOWN
UP
ADJUSTABLE FEET
PREPARATION
300"
6096 x 4572
171.4"(4354mm)
8.6"(218mm)
DOWN
7