Adjusting The Picture; No Show Function - Sanyo PLC-SU07N Owner's Manual

BASIC OPERATION
1
Press ZOOM
button on the Remote Control Unit to turn into the ZOOM mode.
2
Press ZOOM
ZOOM or
1
Press FOCUS
on the Remote Control Unit to turn into the FOCUS mode.
2
Adjust the focus of the image by pressing FOCUS
FOCUS /
Press the NO SHOW button on the Remote Control Unit to turn the
picture into black image. These function is cancelled when the NO
SHOW button is pressed again or any other function button is pressed.
22

ADJUSTING THE PICTURE

ZOOM Adjustment
/ button on the Top Control or ZOOM
or button to have the image larger, and press
button to have the smaller.
FOCUS Adjustment
/ button on the Top Control or FOCUS
button.

NO SHOW FUNCTION

/
Zoom
The message disappears after 4 seconds.
/
Focus
/ or
The message disappears after 4 seconds.
No Show
The message disappears after 4 seconds.