Picture Image Adjustment; Adjusting The Picture Image Manually; Normal Function - Sanyo PLC-XU20E Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

VIDEO MODE

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select

IMAGE

and press the SELECT button. Another dialog box

PICTURE IMAGE ADJUSTMENT Menu will appear.

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the item that you want to adjust by

pressing the POINT UP/DOWN buttons. To change the value,

press either the POINT RIGHT button or the POINT LEFT

button.

Colour

Press POINT LEFT button to adjust the image lighter, and press

POINT RIGHT button to adjust deeper. (From 0 to 63.)

Tint

Press POINT LEFT button to adjust the colour more purple, and

press POINT RIGHT button to adjust more green. (From 0 to 63.)

White balance (Red / Green / Blue)

Move the arrow to Red, Green, or Blue that you want to adjust.

Press POINT LEFT button to adjust the colour of image lighter, and

press POINT RIGHT button to adjust deeper. (From 0 to 63.)

Contrast

Press POINT LEFT button to adjust the image lighter, and press

POINT RIGHT button to adjust deeper. (From 0 to 63.)

Brightness

Press POINT LEFT button to adjust the image darker, and press

POINT RIGHT button to adjust brighter. (From 0 to 63.)

Sharpness

Press POINT LEFT button to adjust the image softer, and press

POINT RIGHT button to adjust sharper. (From 0 to 63.)

Each of the keys operates as follow.

Reset

Recalls the data previously adjusted.

Stored

Stores the data in the memory.

Quit

Closes the PICTURE IMAGE ADJUSTMENT Menu.

The normal picture level is preset on this projector at the factory and

can be restored anytime you press the NORMAL button (located on

the Top Control or on the Remote Control Unit). The "Normal"

display will be displayed on the screen for a few seconds.