Top Controls And Indicators - Sanyo PLC-SU20E Owner's Manual

BEFORE OPERATION
POWER ON–OFF BUTTON
Used to turn the projector
on or off. (P19)
LAMP INDICATOR
This indicator is lit in dim
when the projector is
turned on. And the light is
brightened when the
projector is in stand-by
mode.
READY INDICATOR
This indicator is lit in green
when the projector is ready
to be turned on.
WARNING TEMP. INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
(P33)
LAMP REPLACE INDICATOR
This indicator turns to
yellow when the life of the
projection lamp draws to an
end. (P34)
MENU BUTTON
Used to open or close the
MENU operation.
(P17, 18)
16

TOP CONTROLS AND INDICATORS

LAMP
READY
ON–OFF
WARNING
TEMP.
LAMP
REPLACE
ZOOM FOCUS VOLUME
MENU MODE
SELECT
AUTO IMAGE NORMAL
ZOOM BUTTONS
Used to select zoom adjust.
(P20)
FOCUS BUTTONS
Used to select focus adjust.
(P20)
VOLUME BUTTONS
Used to adjust volume.
(P21)
MODE BUTTON
Used to select input source
either Computer or Video.
(P22, 29)
SELECT BUTTON
Used to execute the item
selected.
It is also used to
expand the image in DIGITAL
ZOOM mode. (P28)
POINT BUTTONS
Used to select an item or
adjust the value on the MENU.
It is also used to pan the image
in DIGITAL ZOOM mode.
(P28)
NORMAL BUTTON
Used to reset to normal
picture adjustment preset
by factory. (P26, 30)
AUTO IMAGE BUTTON
Used to operate AUTO
IMAGE function. (P27)